OWATROL DEKS OLJE D2

€90,72
STOCK: IN STOCK
Collection: Marine

PRODUCT DESCRIPTION

Non-Peel, Flexible High Gloss Yacht Varnish For Interior, Exterior Wood, Non Crack, Rich Appearance.

  • Flexes and moves with the wood so will not peel, craze, flake or blister
  • No sanding between coats and simple ‘touch-up’ maintenance with no stripping
  • Highly transparent varnish which enhances the natural beauty of the wood
  • Generally for use after Dek Olje D1 has been applied first
  • Can be used in a marine environment for all applications above the water line

Properties

  • Flexible film that does not crack, peel or flake
  • High gloss finish
  • Highly transparent varnish – enhances the natural beauty of the wood
  • Offers long term protection
  • No sanding between coats (Tip: when second last coat has dried, sand very lightly over 300 grit) to remove dust particles etc, then apply final coat.)
  • Easy maintenance
  • Easy repair, no stripping

Where to use

  • Exotic hardwoods (Teak, Ipe, Mahogany, Movingui, Bangkirai…) new or weathered
  • Exterior : garden furniture, window  door frames, doors, gates,…
  • Interior: paneling, doors, window frames,…
  • Horizontal & Vertical
  • Boats – all applications above waterline
  • Over Owatrol oil to enhance rustic finish on metal

Recommendations before applying

  • Wood must first be treated with Deks Olje D1 or Owatrol Oil
  • Wood must be clean, dry and free of all contamination
  • Do not apply Deks Olje D2 if wet weather expected
  • Deks Olje D2 could be very slippery and is not suitable for use in areas where it will be walked on (i.e. decks, hardwood decking etc) – use Deks Olje D1 only for these areas
  • Do not Thin

Application

  • Apply multiple coats of Deks Olje D2 allowing 1 day between coats.
  • Allow minimum 12 hours drying between coats
  • No sanding between coats
  • Allow to dry minimum 3-4 days before putting back into service
  • Note: drips and runs should be wiped off immediately

Coverage : 15m²/l

Application tools : Brush - Roller

Application temperature : 8°C to +35°C

Drying : 12 hours. (between each layer)

Working time : 3 days

Clean-up : White-Spirit

For a Non Peel High Gloss Finish, Choose Deks Olje D2