OWATROL PREPDECK
€28,65
•
STOCK:
IN STOCK
PRODUCT DESCRIPTION
Prepdeck – Professional Decking Oil & Wood Finish Stripper
Fast-acting, professional-grade stripper for removing old decking oils, deck stains, mill glaze, grade stamps and other surface contaminants from exterior wood.
- Removes old decking oils, finishes and stains.
- Reduces mill glaze and removes grade stamps.
- Cleans all types of weathered exterior timber.
- Economical and easy to use.
- For exterior use only.
Properties
- Professional-strength wood stripper and cleaner.
- Removes solid and semi-transparent stains.
- Effectively removes mill glaze, grade stamps and surface contaminants.
- Suitable for preparing timber before refinishing.
Where to Use
- Suitable for softwoods, hardwoods and thermo-treated (burnt) wood.
- Ideal for decking, fencing, cladding, log homes and garden furniture.
Dilution Guide
Softwoods (Pine, Douglas Fir)
New Wood
- Removing finishes and grade stamps: Use Prepdeck undiluted.
- Removing mill glaze: Dilute 1:5 with water.
Weathered Wood
- Removing finishes: Use Prepdeck undiluted.
- General cleaning: Dilute 1:20 with water.
High-Tannin Softwoods (Cedar, Redwood)
New Wood
- Removing finishes and grade stamps: Use Prepdeck undiluted.
- Removing mill glaze: Dilute 1:4 with water.
Weathered Wood
- Removing finishes and grade stamps: Use Prepdeck undiluted.
- General cleaning: Dilute 1:20 with water.
Recommendations Before Use
Before purchasing or using Prepdeck, perform a simple water absorption test.
Place a few drops of water on several areas of the dry timber and wait approximately 20 minutes.
- If the water is absorbed into the wood, the timber may only require Net-Trol to restore its natural appearance.
- If the water remains on the surface, an existing coating is still present and Prepdeck should be used to remove it.
- After stripping, it is strongly recommended to neutralise the surface with Net-Trol diluted 4:1 with water before applying most finishes.
- Exception: Neutralisation is not required when applying Tropitech as the final finish.
Coverage & Technical Information
Coverage: 3–4 m²/L (undiluted).
Application tools: Brush, stiff-bristle brush and protective gloves.
Application temperature: 5°C to 35°C.
Working time: 20–30 minutes.
Clean-up: Water or solvent.
